[. . . ] Press any button (except P On) to return the screen to its previous state. Use Copies + or - to set Press l or r to set the the number of copies for density. You can correct color and improve the quality of your images automatically by using the PhotoEnhance function, or manually by using the Brightness, Contrast, Sharpness and Saturation functions. When you have more than 999 photos on your memory card, the LCD screen displays a message to let you select a group. [. . . ] *3 Select the amount the image is expanded when printing Borderless photos. *4 Select Camera Text to print text that you added to you photo using your digital camera. *5 Select On to automatically crop your photo to fit inside the space available for the layout you selected. Select Off to turn off automatic cropping and leave white space at the edges of the photo. *8 Depending on the type of photo, parts of the image other than the eyes may be corrected. You can print ruled paper or graph paper with or without a photo set as the background. Make sure you have installed software for this printer on your computer and connected following the instructions on the Start Here poster. Remove the memory card from the printer, connect the device, then print photos. If non-genuine ink cartridges are installed, the ink cartridge status may not be displayed. Print head cleaning uses ink, so clean the print head only if quality declines. If it does not improve after cleaning four times, turn off the printer for at least six hours. Depending on the settings on this printer and the digital camera, some combinations of paper type, size, and layout may not be supported. Some of the settings on your digital camera may not be reflected in the output. *1 This printer automatically checks the print head nozzle without printing a pattern and cleans the nozzles if they are clogged. *3 You can select the LCD screen display format from 1-up with Info, 1-up without Info, and View Thumbnail Images. The printer's ink pads are nearing the end of their service life. Contact Epson support to replace ink pads before the end of their service life. When the ink pads are saturated, the printer stops and Epson support is required to continue printing. After cleaning, check the print head from the Maintenance menu in Setup mode. If nozzles are still clogged you can continue printing by setting Automatic Head Maintenance to off from the Maintenance menu in Setup mode. (Cause: The data is not available because of a malfunction in the device. The print head cannot be cleaned completely with Auto Head Maintenance. [. . . ] The printer may resume printing, but if it does not, try printing again. O When you turn off your printer, a red lamp inside the printer may remain on. The lamp will stay on for a maximum of 15 minutes, then go out automatically. If you cannot solve the problem using the troubleshooting information, contact customer support services for assistance. [. . . ]